Motor Pulley with Electromagnetic Brake, Clutch or manual counter-rotation brake

Benefits

• 96% mechanical efficiency, allowing savings of up to 30% in energy consumption compared to external units.
• Virtually maintenance free, it only requires oil change every 50,000 hours of operation.
• They can operate with an inverter and do not lose torque up to 1/10 of the nominal frequency of 60HZ.
• Hermetic sealing that prevents leaks and prevents contaminants from affecting the engine.
• High alloy steel gears. Precision cut, hardened and sharp, reducing noise levels to a minimum.
• All components are made of iron to withstand higher stress levels.
• High pressure polymer immersed (VPI) vacuum wound electric motors, 100% tested and above NEMA standards.
• The drum can have a wide variety of coatings and finishes, handle sprockets and even have special shapes or attachments, such as brushes, teeth, paddles for grinding or grinding, conical shape for curved conveyors, different diameters to accommodate more than one type of belt at the same time , etc.
• The electromechanical brake system allows all rotating components to come to a complete stop when desired. This system is ideal for:
• Bi-directional applications with indexing up to 40 starts and stops per minute.
• Typical applications include baggage handling, manufacturing and assembly lines, document or parcel handling, palletizing and packaging, etc.
• The clutch system is a patented design that allows greater indexing by allowing the electric motor to always remain in motion, avoiding the voltage consumption peaks typical of motor starting, reducing energy consumption and the heat generated. The system is located inside the motorbike pulley, but in a separate compartment from the engine
• The manual counter-twist brake is ideal for use on inclined conveyors, allowing the motor pulley to rotate freely in the opposite direction so that the belt can be unloaded.